Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Parameter list gives empty sweep
Posted 2014年6月9日 GMT+2 21:29Studies & SolversVersion 4.42 Replies
Please login with a confirmed email address before reporting spam
Hello,
I am modeling a system intended to display light scattering off of a particle suspended in a liquid medium. I used Electromagnetic Waves, Frequency Domain (emw) and keep getting the error "The following feature has encountered a problem: Parameter list gives empty sweep - Feature: Parametric 1 (sol1/s1/p1).
What does this mean? Am I required to include a parametric sweep in order to use the pre-made study option? I only intend to model under one set of conditions.
Thanks,
Daniel Frantz
I am modeling a system intended to display light scattering off of a particle suspended in a liquid medium. I used Electromagnetic Waves, Frequency Domain (emw) and keep getting the error "The following feature has encountered a problem: Parameter list gives empty sweep - Feature: Parametric 1 (sol1/s1/p1).
What does this mean? Am I required to include a parametric sweep in order to use the pre-made study option? I only intend to model under one set of conditions.
Thanks,
Daniel Frantz
2 Replies
Last Post 2014年8月22日 GMT+2 23:43
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
It can be cause by you not assigning an "initial" frequency in the frequency domain tab.
Phil
It can be cause by you not assigning an "initial" frequency in the frequency domain tab.
Phil
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
Try to add frequencies in "Frequency Domain"
Gordon
Try to add frequencies in "Frequency Domain"
Gordon