Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Heat transfer across unmeshed gap
Posted 2009年10月9日 GMT+2 12:143 Replies
Please login with a confirmed email address before reporting spam
Hello,
Problem:
a 2d filled circle material A surrounded by a gap and then that is surrounded by another material material B.
Material A is heat generating I would like to remove the heat from the edge of material A and use it as a value to heat the inner edge of material B, i have these edges as identity pairs so i can know the gap thickness as this is used to modify the edge to edge energy transfer.
I am not sure how to implement this, but i do not want to mesh the gap for other reasons. Any advice would be greatly appreciated.
Problem:
a 2d filled circle material A surrounded by a gap and then that is surrounded by another material material B.
Material A is heat generating I would like to remove the heat from the edge of material A and use it as a value to heat the inner edge of material B, i have these edges as identity pairs so i can know the gap thickness as this is used to modify the edge to edge energy transfer.
I am not sure how to implement this, but i do not want to mesh the gap for other reasons. Any advice would be greatly appreciated.
3 Replies
Last Post 2009年10月10日 GMT+2 14:38
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I find it difficult to follow what you are trying to do, I would understand that the "gap" is of some material, or vacuum, hence there should be some real physical properties that you can set and work with 3 "materials".
But you can also integrated the temperature form the inner material boundary and distribute it over another boundary. For that I would suggest to use the integration boundary variables.
There is an example in the COMSOL documentation where they link the temperature of one wall to another, it uses a similar approach. Unfortunately I could not find it back, there are so many books to pass through.
Good luck
Ivar
I find it difficult to follow what you are trying to do, I would understand that the "gap" is of some material, or vacuum, hence there should be some real physical properties that you can set and work with 3 "materials".
But you can also integrated the temperature form the inner material boundary and distribute it over another boundary. For that I would suggest to use the integration boundary variables.
There is an example in the COMSOL documentation where they link the temperature of one wall to another, it uses a similar approach. Unfortunately I could not find it back, there are so many books to pass through.
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
I am trying to avoid meshing the gap as the gap would eventually close, i was hoping to hide the gap in the linking of the two walls.
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
Well I would start by studying the "GUIDE.PDF" COMSOL user guide, section "Using Coupling Variables"
Good luck
Ivar
Well I would start by studying the "GUIDE.PDF" COMSOL user guide, section "Using Coupling Variables"
Good luck
Ivar