Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
mesh import from ANSYS Fluent to COMSOL
Posted 2011年4月10日 GMT+2 19:18 Fluid & Heat, General, Computational Fluid Dynamics (CFD) Version 3.5a 1 Reply
Please login with a confirmed email address before reporting spam
i want to import .msh mesh file to comsol, but it seems i can only import .mphtxt and .mphbin,
any suggestions.
any suggestions.
1 Reply Last Post 2011年4月10日 GMT+2 23:43
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
if you check the doc you will see that you can only import a NASTRAN neutral file format.
But anyhow, what to do with a mesh ?
You connect the physics to Geometrical Entities in COMSOL, and the meshing comes thereafter, it gets its "properties by inherence, this is a fundamental difference between classical (or olders) FEM programmes and the COMSOL approach
You need to transform the mesh to higher order geometrical entities (which is partially done in 3.5 on some simple Nastran neutral file type meshes)
--
Good luck
Ivar
if you check the doc you will see that you can only import a NASTRAN neutral file format.
But anyhow, what to do with a mesh ?
You connect the physics to Geometrical Entities in COMSOL, and the meshing comes thereafter, it gets its "properties by inherence, this is a fundamental difference between classical (or olders) FEM programmes and the COMSOL approach
You need to transform the mesh to higher order geometrical entities (which is partially done in 3.5 on some simple Nastran neutral file type meshes)
--
Good luck
Ivar