Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Closed loop form of the streamlines
Posted 2012年2月17日 GMT+1 19:54Fluid & Heat, MicrofluidicsVersion 4.2a0 Replies
Please login with a confirmed email address before reporting spam
Hello everyone,
I am working on the flow of fluid through 2 types of L-Shaped channels, with a sharp corner and one with a curvature, (like a fillet) and wish to use the vortices appearing at the corners for my research.
I am using version 4.2a for the same, and can plot the normal streamlines along the flow direction
How does one plot a closed streamline, like a loop which can represent a vortex or a circulation in a channel geometry with a curvature or a sharp corner flow ?
Kindly help me on this.
Thanks !!
Akshay
I am working on the flow of fluid through 2 types of L-Shaped channels, with a sharp corner and one with a curvature, (like a fillet) and wish to use the vortices appearing at the corners for my research.
I am using version 4.2a for the same, and can plot the normal streamlines along the flow direction
How does one plot a closed streamline, like a loop which can represent a vortex or a circulation in a channel geometry with a curvature or a sharp corner flow ?
Kindly help me on this.
Thanks !!
Akshay
0 Replies
Last Post 2012年2月17日 GMT+1 19:54
Hello Akshay Kale
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.