Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Thermal Expansion
Posted 2012年5月4日 GMT+2 11:09Version 4.2a1 Reply
Please login with a confirmed email address before reporting spam
I am modeling a Micro-heater. As i am using Joule heating with thermal expansion, i want to plot thermal expansion.
guide me to obtain the thermal expansion 3-D surface plot
--
Vineet Bansal
Project Associate, NPMASS
Electronic Science Department
Kurukshetra University, Haryana
1 Reply
Last Post 2012年5月4日 GMT+2 17:08
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
try a volume plot - volume with ts.disp as variable (I believe its the default one that comes up, if it's not already part of the 1-2 default plots
then you can look at the detailed displacements with u,v,w, or directly the strain or stress tensor components
--
Good luck
Ivar
try a volume plot - volume with ts.disp as variable (I believe its the default one that comes up, if it's not already part of the 1-2 default plots
then you can look at the detailed displacements with u,v,w, or directly the strain or stress tensor components
--
Good luck
Ivar