Menu

Discussion Forum

New Discussion
查找

Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.

Induction Heating Litz Coil

Posted 2023年12月28日 GMT+1 13:372 Replies

Deiaaldeen Mohammed Khaleel
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Greetings, I have built the single strand planar coil shown the the picture. and I need to make it as an approximation of the litz coil what to do ? can I solve the inductance of one strand and cosider it a good approximationof the inductance of the actual litz coil made of 59 strand? thank you in advance. [https://drive.google.com/file/d/16kRkN3z-0Y2pV_PbkDCk5yIotiS-tzla/view?usp=drive_link]

2 Replies Last Post 2024年1月2日 GMT+1 17:25
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 months ago 2023年12月30日 GMT+1 18:24

The single strand is probably a reasonable approximation for practical purposes. Difficult to assess how large the error might be.

Cheers,

Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
The single strand is probably a reasonable approximation for practical purposes. Difficult to assess how large the error might be. Cheers, Edgar
Dave Greve Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 months ago 2024年1月2日 GMT+1 17:25
Updated: 8 months ago 2024年1月2日 GMT+1 17:23

I can't look at the picture, it seems to require a password. Maybe just post the image?

I looked at modeling a Litz coil a while ago. Exact modeling would require a really large number of elements and I concluded it was not realistic. There are empirical expressions for loss out there (in the literature, and from litz wire suppliers).

(I'm surprised that litz conductors are being considered for induction heating, as cooling of the coil is usually a concern.)

I can't look at the picture, it seems to require a password. Maybe just post the image? I looked at modeling a Litz coil a while ago. Exact modeling would require a really large number of elements and I concluded it was not realistic. There are empirical expressions for loss out there (in the literature, and from litz wire suppliers). (I'm surprised that litz conductors are being considered for induction heating, as cooling of the coil is usually a concern.)

Note that while COMSOL employees may participate in the discussion forum, COMSOL®software users who are on-subscription should submit their questions via theSupport Centerfor a more comprehensive response from the Technical Support team.

Suggested Content

Baidu
map