Modeling a 3D Waveguide that Support Multiple Modes

Please login with a confirmed email address before reporting spam

Dear All

I am simulating a 3D waveguide that supports multiple modes at higher frequencies. I am following the instruction written in this blog: https://www.comsol.com/blogs/modeling-waveguides-that-support-multiple-modes/

Injecting the TE10 and TE20 modes in my model produce the following error message:

  • Feature: Stationary Solver 1 (sol1/s1) Failed to find a solution. Singular matrix.

For mesh case 0 there are 1 void equations (empty rows in matrix) for the variable comp1.emw.S3x. at coordinates: (0,0,0), ... For mesh case 0 there are 1 void equations (empty rows in matrix) for the variable comp1.emw.S4x. at coordinates: (0,0,0), ... and similarly for the degrees of freedom (empty columns in matrix). Returned solution is not converged. Not all parameter steps returned.

Would you please help me with this? Could you please show me, if there is any other method, how to inject multiple modes into a silicon waveguide? I am using RF and waveOptics modules.

Thanks in advance, Manal


4 Replies Last Post 2024年2月27日 GMT+1 01:38
Dave Greve Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2024年2月23日 GMT+1 20:49
Updated: 6 months ago 2024年2月23日 GMT+1 20:49
  1. Post your model.
  2. Which is it, RF or Wave optics??
1. Post your model. 2. Which is it, RF or Wave optics??

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2024年2月23日 GMT+1 21:04
Updated: 6 months ago 2024年2月24日 GMT+1 16:35

Dear Dave

Thanks for your quick responce,

It is RF like an example on the blog: https://www.comsol.com/blogs/modeling-waveguides-that-support-multiple-modes/

I have attached my model and had to clear the result and Mesh to reduce the size file.

Thanks,

Dear Dave Thanks for your quick responce, It is RF like an example on the blog: https://www.comsol.com/blogs/modeling-waveguides-that-support-multiple-modes/ I have attached my model and had to clear the result and Mesh to reduce the size file. Thanks,

Dave Greve Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2024年2月23日 GMT+1 21:55
Updated: 6 months ago 2024年2月23日 GMT+1 21:55

Since this is a clad waveguide, the mode launched at the input port is not a TE01 waveguide mode. When you select a rectangular port the TE01 mode Comsol tries to use satisfies the boundary conditions of a metal-clad waveguide. Clearly that isn't the right mode shape whether you select the entire face or just the silicon face.

To solve this problem you need to do a boundary mode analysis for the ports first and then select "numeric" for the port type. I think you can find examples of this on the Comsol website.

I strongly recommend that you set up and solve a uniform waveguide problem with a single input and output first.

Since this is a clad waveguide, the mode launched at the input port is not a TE01 waveguide mode. When you select a rectangular port the TE01 mode Comsol tries to use satisfies the boundary conditions of a metal-clad waveguide. Clearly that isn't the right mode shape whether you select the entire face or just the silicon face. To solve this problem you need to do a boundary mode analysis for the ports first and then select "numeric" for the port type. I think you can find examples of this on the Comsol website. I strongly recommend that you set up and solve a uniform waveguide problem with a single input and output first.

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2024年2月27日 GMT+1 01:38
Updated: 6 months ago 2024年3月2日 GMT+1 00:29

Dear Dave

Many thanks for your reply,

Your help is much appreciated, Manal

Dear Dave Many thanks for your reply, Your help is much appreciated, Manal

Reply

Please read thediscussion forum rulesbefore posting.

Pleaselog into post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL®software users who are on-subscription should submit their questions via theSupport Centerfor a more comprehensive response from the Technical Support team.

Baidu
map