How to set the conditions for simulating the vibration of ultrasonic sensors

Please login with a confirmed email address before reporting spam

The excitation source is set to the specified displacement, and the pressure of solid mechanics is calculated. When calculating displacement, there is displacement only when the signal is input, and the subsequent displacement is always zero. How to solve this problem


1 Reply Last Post 2024年3月11日 GMT+1 13:39
Mark Cops COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2024年3月11日 GMT+1 13:39
Updated: 6 months ago 2024年3月11日 GMT+1 13:39

We would likely need to see the .mph file to provide specific guidance for this question. Can you upload it to the forum? Otherwise it might help to compare the model to models with similar setup like here: https://www.comsol.com/model/piezoacoustic-transducer-1477.

-Mark

We would likely need to see the .mph file to provide specific guidance for this question. Can you upload it to the forum? Otherwise it might help to compare the model to models with similar setup like here: https://www.comsol.com/model/piezoacoustic-transducer-1477. -Mark

Reply

Please read thediscussion forum rulesbefore posting.

Pleaselog into post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL®software users who are on-subscription should submit their questions via theSupport Centerfor a more comprehensive response from the Technical Support team.

Baidu
map