Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Modeling impact-echo on Comsol
Posted 2010年4月12日 GMT+2 17:340 Replies
Please login with a confirmed email address before reporting spam
Hi,
my research project is based on modeling the impact-echo method in order to analyze frequency responses of the structure. I work on post-tensioned concrete beam with ungrouted duct and I want to test this structure to determine the possibilities of impact-echo to detect voids inside the duct. So my question is on the choice of the module in Comsol. I chose pressure acoustic module and I want to know if I’m right because this is normally for fluids or gaz. I simulate the impact by parametric solver. I inject a series of frequency which belong to a specter. then I plot the results in Matlab program.
Thank you for your help
Josselin PEREZ
Student in University of Sherbrooke, Québec, Canada
my research project is based on modeling the impact-echo method in order to analyze frequency responses of the structure. I work on post-tensioned concrete beam with ungrouted duct and I want to test this structure to determine the possibilities of impact-echo to detect voids inside the duct. So my question is on the choice of the module in Comsol. I chose pressure acoustic module and I want to know if I’m right because this is normally for fluids or gaz. I simulate the impact by parametric solver. I inject a series of frequency which belong to a specter. then I plot the results in Matlab program.
Thank you for your help
Josselin PEREZ
Student in University of Sherbrooke, Québec, Canada
0 Replies
Last Post 2010年4月12日 GMT+2 17:34
Hello
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.